AN INNOVATIVE SMART ORAL DELIVERY TECHNOLOGY FOR PROTEINS AND PEPTIDES

Citation: Engel A, Benedikt A, Baer H, “An Innovative Smart Oral Delivery Technology for Proteins & Peptides”. ONdrugDelivery Magazine, Issue 69 (Jul 2016), pp 8-11.

Andrea Engel, Anne Benedikt and Hans Baer explain how their recently introduced new modular platform technology for improving the oral bioavailability of peptides may offer a feasible solution to the problem of compliance with peptide drugs.

During the last few decades the use of therapeutic proteins and peptides for applications in medicine and biotechnology has gained high interest. Peptide drugs can be highly beneficial in major diseases such as diabetes, oncology and metabolic disorders but the fact they have to be delivered as injections has limited their appeal. The global peptide market is expected to increase up to US$25.4 billion (£19.2 billion) in 2018.Therapeutic peptides in general are known to be highly selective, efficacious, safe and well tolerated.

“Patients receiving protein and peptide injections often experience discomfort and pain, which results in an overall inconvenient therapy concept…”

Most pharmaceutical proteins and peptides are considered to be BCS Class III drugs, thus having a good solubility but poor permeability, which leads to an overall poor bioavailability. Furthermore, poor stability and short plasma half-life are major drawbacks. Therefore, most of the protein and peptide drugs in the market today are administered parenterally as injections. Patients receiving protein and peptide injections often experience discomfort and pain, which results in an overall inconvenient therapy concept.

For patients and medical practitioners alike, compliance is often a determining factor in the choice of medication. It has a significant impact on how widely a drug is prescribed. A study revealed patients’ preferences for different routes of administration, showing the majority of patients preferred daily tablets over monthly injections.Nevertheless, various formulation approaches for oral protein and peptide delivery considered in the last decades have not constituted the desired breakthrough.³

In order to offer a feasible solution, Evonik recently introduced a new modular platform technology for improving the bioavailability of peptides. Evonik’s EUDRATECTM PEP technology allows treatment in capsule form, replacing unpleasant injections and therefore tremendously enhancing patient compliance.  The technology provides all the advantages of oral solid dosage forms for poorly permeable active pharmaceutical ingredients
such as, but not limited to, proteins and peptides. Due to its modular approach, the finished dosage form can be tailored to the drug’s special needs.

EUDRATECTM PEP TECHNOLOGY

Various aspects have to be considered during formulation development including the stability, solubility and permeability of proteins and peptides, the site of absorption and the compatibility with the mucus. The innovative EUDRATECTM PEP technology is a modular multiparticulate platform technology.

The formulation approach uses conventional oral solid dosage form manufacturing technologies and can therefore be integrated easily in existing manufacturing concepts. The drug products are formulated on the basis of either microparticles or mini-pellets, wherein the particles contain various thoroughly selected modules of the EUDRATECTM PEP system that are required for the specific active.

Several synergistic modules include the active ingredient, a permeation promotor, a bioavailability promoting agent and a polymeric coating for the gastrointestinal targeted release. Depending on the type of active ingredient, additional modules can be applied to achieve further customised and beneficial functionalities. Each particle is essentially a complete pharmaceutical system, typically comprised of four basic modules (Figure 1). The following standard modules are applied:

  • Gastrointestinal targeting
  • Absorption promotor
  • Enzymatic protection
  • Mucocompatibility.

The following advanced modules can be applied additionally:

  • Anti-aggregate
  • Release control
  • Active ingredient specific components, e.g. stabiliser.

 

#69 Jul2016 ONdrugDelivery Evonik Figure 1

Figure 1: Typical EUDRATECTM PEP particle design.

THE MODULES AT A GLANCE

Up to now, parenteral administration remains the most common application route for therapeutic macromolecular active ingredients like proteins and peptides due to their poor oral bioavailability. However, considering patient acceptance and long-term compliance, the oral administration route is preferred, resulting in an increase in the therapeutic value of the drug. The formulation of proteins and peptides as oral dosage forms

requires advanced drug delivery strategies  to overcome physiological challenges of the gastrointestinal tract, including enzymatic degradation, poor permeability and large molecular size 4 and thus ensuring proper
bioavailability (Figure 2).

#69 Jul2016 ONdrugDelivery Evonik Figure 2

Figure 2: From liquid for injection only to solid oral dosage form.

Gastrointestinal Targeting

Proteins and peptides require protection from the gastric fluid to avoid degradation induced by the stomach’s acidic environment. When entering the upper small intestine, the environmental pH increases and the protective functionality shall disappear.

Such functionalities are offered by commonly used enteric coatings. Over more than 60 years, anionic EUDRAGIT® polymers have been the industry standard for delayed release coatings, preventing the release of the active pharmaceutical ingredient in the stomach. The poly(meth)acrylate chemistry behind EUDRAGIT® polymer systems provides an exceptionally versatile platform for designing drug delivery to match the specifics of individual pharmaceutical actives and treatments. The polymers used in EUDRATECTM PEP are impervious to the stomach’s acidic environment, but dissolve rapidly at specific higher pH values.

Absorption Promotor

The absorption of proteins and peptides is very limited due to their size and the intestinal barrier. An absorption promoter mediates enhanced permeation over the intestinal barrier via the paracellular pathway. The efficacy of penetration enhancers depends on several factors, including peptide type, nature of the enhancer, physicochemical properties of the delivery system as related to the drug release, and the site of application. In order to provide a successful concept, the enhancer must be released either simultaneously with or shortly before the peptide.5 Several absorption enhancers are discussed in the literature, but a key aspect of absorption promotors is to act reversibly and without persistent impairment.

Enzymatic Protection

One of the main obstacles limiting oral bioavailability of proteins and peptides is caused by luminal or brush border membrane-bound proteolytic enzymes such as pepsin, trypsin, chymotrypsin and pancreatin, leading to a severe pre-systemic degradation in the gastrointestinal tract. An enzymatic inhibitor has to be selected for peptide protection from proteases. It is dependent on the amino acid composition and on the position of the amino acids within the active peptide as well as the pH value.6

Mucocompatibility

The luminal surface of the intestinal membrane is covered by a layer of mucus which effectively protects the epithelial surfaces. Excipients interfering with mucus can increase the residence time at certain absorption windows. Such local increases in combination with high concentrations of proteins and peptides generate a favourable diffusion gradient to support the permeation through the mucus barrier.

Multiparticulate Dosage Form

In EUDRATECTM PEP formulations, the therapeutic dose is distributed over a large number of particles which are assembled into a capsule as a multi-unit dosage form. The final dosage forms are manufactured by using polymers and materials that are physiologically safe in conventional production processes, and can also be used in GMP compliant production processes.

“Overall, Evonik’s proprietary EUDRATECTM PEP smart
formulation toolbox for oral administration of macromolecular active pharmaceutical ingredients provides a unique concept for
tailor-made drug delivery profiles…”

BIOAVAILABILITY ENHANCEMENT PROVEN IN VIVO

Several in vivo studies emphasise the therapeutic benefits of the EUDRATECTM PEP technology. It was applied for an anionic glycosidic drug which does not show any oral bioavailability when used unformulated. The drug is typically administered parenterally. A study in monkeys revealed that the activity of the drug could be measured in plasma. Furthermore, very promising pharmacokinetics providing a prolonged and adjustable plasma profile could be obtained through repeated application (Figure 3).

In addition to that the EUDRATECTM PEP system was used to enhance the bioavailability of a commercially available oral peptide formulation. The technology led to a seven-fold increase of relative bioavailability of the peptide in a mini-pig cross-over study compared to the conventional tablet (Figure 4).

#69 Jul2016 ONdrugDelivery Evonik Figure 4

Figure 3: EUDRATEC™ PEP mean activity profile in a monkey study (n=3), second application after 24 hours.

 

#69 Jul2016 ONdrugDelivery Evonik Figure 4

Figure 4: Mean plasma profiles in a mini-pig cross-over study (n=8).

BENEFITS OF EUDRATECTM PEP

As a modular, multiparticulate platform technology, customised functionalities can be achieved successfully. EUDRATECTM PEP formulations increase the oral bioavailability of proteins and peptides as well as other small and medium-sized biopharmaceuticals. The system enables parenterally administered medicines to be replaced by oral dosage forms. In vivo studies confirmed the suitability to enhance the bioavailability of drugs and the safety advantage of the system versus parenteral formulations.

Evonik’s absorption enhancers were well tolerated in animal studies. EUDRATECTM PEP formulations have shown superior results in pig and monkey studies employing a peptide drug and an anionic glycoside drug, respectively.

As a technology provider, Evonik offers a well-designed concept for the customised formulation development, starting with the selection of suitable EUDRATECTM PEP modules and materials based on the physicochemical characteristics of the protein or peptide used. The chosen modules and materials are then evaluated within a systematic compatibility study.

Followed by the manufacturing of first preclinical prototypes, Evonik performs standardised in vitro characterisation of the prototypes employing compendia test methods. Besides pharmacopoeial dissolution test methods, investigations with bio-relevant media are a core competency of Evonik. In addition, biopharmaceutical in vitro assays, such as the well-established Caco-2 transport assay, are performed in order to gain first indications of the drug transport across the intestinal barrier. After a successful prototype screening, Evonik can provide samples for preclinical studies and clinical development.

Overall, Evonik’s EUDRATECTM PEP smart formulation toolbox for oral administration of macromolecular active pharmaceutical ingredients provides a unique concept for tailor-made drug delivery profiles.

THE FUTURE

EUDRATECTM PEP provides valuable opportunities for the lifecycle management of parenteral protein and peptide formulations. The unique technology generates advanced pharmacokinetics and economic advantages compared with conventional oral formulation concepts by significantly reducing the quantity of drug required and thus lowering product costs. Compliance is significantly improved thus increasing the therapeutic success of the specific protein or peptide.

REFERENCES

  1. Fosgerau K et al, “Peptide therapeutics: current status and future directions”. Drug Discov Today, 2015, Vol 20(1), pp 122-128.
  2. Fallowfield L et al, “Patients’ preference for administration of endocrine treatments by injection or tablets: results from a study of women with breast cancer”. Ann Oncol, 2006, Vol 17(2), pp 205-210.
  3. Hassani L et al, “Oral peptide delivery: Technology landscape & current status”. ONdrugDelivery, 2015, Issue 59, pp 12-17.
  4. Shaji J et al, ”Protein and Peptide Drug Delivery: Oral Approaches”. Indian J Pharm Sci, 2008, Vol 70(3), pp 269-277.
  5. Lee VH et al, “Mucosal penetration enhancers for facilitation of peptide and protein drug absorption”, Crit Rev Ther Drug Carrier Syst, 1991, Vol 8(2), pp 91-192.
  6. Bernkop-Schnuerch A, “Multifunctional matrices for oral peptide delivery”. Critical Reviews, 2001, Vol 18(5), pp 459-501.

Comment on this article

Top

W3 Total Cache is currently running in Pro version Development mode.